45+ Years Of Excellence Think Safety & Think Kusam-Meco
High Safety UL Approved Digital Clampmeter

KM 078 AmpTip low-current range calibrated at

Model — KM 078

EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11) : DCA and DC+ACA Functions, in an RF field of 1V/m : Total Accuracy = Specified Accuracy + 20 digits at around 405MHz Ohm Functions, in an RF field of 1V/m : Total Accuracy = Specified Accuracy…

Specifications

General Specifications
Sensing AC+DC; True RMS
Jaws Opening size 35mm Max.
Display 3-5/6 digits 6000 counts Update Rate : 5 per second nominalí Polarity : Automaticí Operating Temperature : 0ºC to 40ºCí Relative Humidity : Maximum relative humidity í 80% for temperature up to 31ºC decreasing linearly to 50% relative humidity at 40ºC Altitude : Operating below 2000mí Storage Temperature : -20°C ~ 60°C, \í <80% R.H. (with battery removed)
Safety Double insulation per UL/IEC/EN61010-1 Ed. 3, IEC/EN61010-2-033 Ed.1,CAN/CSA C22.2 No.61010-1 Ed. 3, IEC/EN61010-2-032 Ed. 3 & IEC/EN61010-031 Ed. 1.1 Measurement Category : CAT III 600V AND -
Temperature Coefficient Nominal 0.15 x o o o o o (specified accuracy) / C @ (0C -- 18C or 28C -- 40C), or otherwise specified Power Supply : Standard 1.5V AAA Size Battery X 2í Power Consumption : typical 13mAí Low Battery : Below approx. 2.85V for Capacitance & Hz í Below approx. 2.5V for other functions APO timing : Idle for 32 minutesí APO Consumption : typical 5mAí Dimension : 223(L) x 76(W) x 37(H)mmí Weight : approx 234 gms.í
E.M.C. Meets EN61326-1 : 2006 (EN55022, EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11) : DCA and DC+ACA Functions, in an RF field of 1V/m : Total Accuracy = Specified Accuracy + 20 digits at around 405MHz Ohm Functions, in an RF field of 1V/m : Total Accuracy = Specified Accuracy + 25 digits Other Functions, in an RF field of 3V/m : Total Accuracy = Specified Accuracy + 20 digits Transient Protection : 6.0kV (1.2/50ms surge)- Rugge…

Overview

EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11) : DCA and DC+ACA Functions, in an RF field of 1V/m : Total Accuracy = Specified Accuracy + 20 digits at around 405MHz Ohm Functions, in an RF field of 1V/m : Total Accuracy = Specified Accuracy + 25 digits Other Functions, in an RF field of 3V/m : Total Accuracy = Specified Accuracy + 20 digits Transient Protection : 6.0kV (1.2/50ms surge)- Rugged Fire retarded casing.- LVD EN61010-2-032/EN61010-2-032/EN61010-2-033 to CAT III 600V & CAT IV 300V-

Manuals, Catalogues & Software

Reviews & QA

No reviews yet for this product. Have a question about KM 078 AmpTip low-current range calibrated at? Contact us and our team will get back to you shortly.

Send Enquiry